Sports Facilities

Indoor Synthetic Turf Football Pitch


Indoor Synthetic turfs ; the sides and site-roof are closed with the construction system in accordance with the static calculations. The construction is covered with tarpaulin or corrugated material made of glass fibre material. Pitch sides can be opened and closed if desired. The third and fourth generation synthetic turfs are used on the pitch floor and turn-key is made within 6-8 weeks with the expert and experienced team of Reform Sports. Recommended site measurements range from 20x40m to 30x60m.
 

Indoor Football Pitch Construction Cost

 

The cost of construction of the Indoor Football Pitch varies primarily according to the type of the Indoor Football Pitch. Tarpaulin, sheet or pvc coating material used in the construction of covered  fields shows price differences. The most important price difference in indoor  field construction is due to its size.

Indoor  pitches for commercial purposes can be made from 20mx40m up to 30mx50m. The most preferred indoor  area that allows 7 × 7 people to play ball easily is 30mx50m. 20mx40m is usually small in commercial indoor  pitches, but 25mx45m indoor  pitch can be preferred in price performance.

What are the factors that affect the cost of  pitch?

  • Artificial turf  model also affects the cost of  pitch. Prices of synthetic turfs vary with factors such as fibril, monofilament, pile length, frequency, vertebrate.
  • In addition, the choice of  field lighting as LED is one of the factors that increase the price. Although the initial cost of LED lighting is very high, it pays for itself in as little as one and a half years. 100W LED projector will be enough instead of 400W halide projector .
  • Artificial turf  granules thrown on the field also affects the cost of the field. The use of high quality grey granules or green granules instead of black SBR granules is another factor that increases the price.

Field construction,  field construction cost,  field artificial turf  prices, indoor  field installation, synthetic turf, monofilament  pitch turf, fibril synthetic turf to get support and price issues, please contact us to learn.

 

Indoor Synthetic Turf Football Pitch Construction Stages


  • 1. Stage
    Football Pitch Dimension 18m * 36m = 648 m² (all purpose) 20m * 40m = 800 m² 25m * 40m = 1000 m² 25m * 45m = 1125 m² 27m * 47m = 1269 m² 30m * 50m = 1500 m² 32m * 52m = 1664 m² The most suitable pitches are considered to be approximately 30m * 50m. Larger pitches are not suitable for commercial use and for amateur football fans.
  • 2. Stage
    Excavation: The ground excavation to be made on the field is made to zero code. The foundation is excavated around the site for the pattern of the surrounding beams. Perimeter Beam Concrete: It is connected to the site in certain dimensions. Mesh is made by using 10 and 12 Q iron bars Drainage pipes with a depth of 30 cm will be placed at certain intervals after the iron mat is placed to discharge the surface water. It is important to note that the inclination of the drainage pipes is inclined outwards. The anchor sheet plates are placed into the concrete with studs at regular intervals. BS 20 Ready-mixed concrete is poured into the surrounding moulds Gravel filling will be made on the ground after the surrounding concrete.
  • 3. Stage
    Anchor plates placed in the perimeter beams are welded with double vertical pipes connected to each other. Shears with a certain degree of curvature are mounted on the vertical poles. Pipes are installed horizontally on the shears at certain intervals. Projector connection pipes are installed on the right and left sides of the site at appropriate intervals . The construction area is covered with canvas or glass fiber material. 1 hinged door will be built on the site. Two masts will be constructed. After all iron production is done, it will be painted with the desired color with 2 layers of oil paint as 1 layer primer. Fields around 5 × 5 cm eye range , wall thickness 3.6 mm, will be coated with dip galvanized and PVC coated wire mesh. After the wire mesh tensioning connection is made, the steel rope will be tensioned, the tensioned steel ropes will be connected with the terminals. Closed The sides of the field will be covered with a mesh made of polyamide yarn with 12x12cm mesh. The field will be covered with a mesh made of polyamide yarn with a mesh size of 15 × 15 cm. The castles shall be covered with a mesh made of 4 mm polyamide yarn in a 12×12 cm mesh. 400 W Metal Halide projectors will be installed on the projected poles. Electrical Installation up to the panel shall be installed and the Projectors shall be delivered in working condition.
  • 4. Stage
    Completely felt is laid on the ground surface. Turf is laid on the floor. The glue of the glued helmet is placed on the joints of the artificial turf to ensure that the joints are properly adhered. Adhesive used in helmet’s cloth will be double component Polyurethane. The field lines are optionally cut into white or yellow and placed in accordance with the measurements. The area between the corners and crown lines and the wire mesh shall be woven on the tile-colored Sieved, washed, baked silica sand will be fed into the ground by Special Sand pouring and brushing machine. The granules will be fed with special machine and the game will be played.

Football Pitches

PRODUCTS

You can examine our products that you can use in the production of sports equipment.
ALL PRODUCTS