Vertical pole pipes shall be welded to the anchor pipes placed in the surrounding beams. Vertical, top, middle and horizontal pipes will be welded. Diagonal reinforcement shall be applied to horizontal pipes at all four corners. Vertical reinforcement pipes shall be installed at suitable intervals for vertical pipes on all four sides of the site. In order to reinforce the site construction, long edges and cross-section ular X ”shaped cross-pipes will be welded. For Lighting Poles Pipes perpendicular to the long sides of the site shall be manufactured with ladders. 1 hinged door will be built on the site. Two masts will be constructed. After all iron production is done, it will be painted with the desired color with 2 layers of oil paint, one layer of primer. The area will be covered with 5 × 5 cm mesh, 3.6 mm wall thickness, dipped galvanized and PVC coated wire mesh. After the wire mesh tensioning connection is made, the steel rope will be tensioned, the tensioned steel ropes will be connected with the terminals. The sides of the field will be covered with a mesh made of polyamide yarn with a mesh size of 12x12cm. The field will be covered with a mesh made of polyamide yarn with a mesh size of 15 × 15 cm. The castles shall be covered with a mesh made of 4 mm polyamide yarn in a 12×12 cm mesh. 400 W Metal Halide projectors will be installed on the manufactured poles. Electrical Installation up to the panel and the projectors will be delivered in working condition.

Completely felt is laid on the ground surface. Grass Carpet is laid on the floor. The glue of the glued helmet is placed on the joints of the laid Grass Carpet and the joints are adhered thoroughly. Adhesive used in helmet’s cloth will be double component Polyurethane. Field lines are optionally cut into white or yellow and placed in accordance with the measurements. The area between the corners and crown lines and the wire mesh shall be woven on the tile-colored carpet. Sieved, washed, baked silica sand will be fed into the carpet by Special Sand pouring and brushing machine. The granules will be fed with special machine and the game will be played.

Football Pitch Dimensions 18m * 36m = 648 m² (Multi purpose) 20m * 40m = 800 m² 25m * 40m = 1000 m² 25m * 45m = 1125 m² 27m * 47m = 1269 m² 30m * 50m = 1500 m² 32m * 52m = 1664 m² The most suitable synthetic turfs are considered to be approximately 30m * 50m. Larger pitches are not suitable for commercial use and for amateur football fans.